Ways to Repair Cracks in Walls



How to Permanently Repair Cracks in Walls?

No matter how old or new your house or any other construction is, the only way to identify its age is by locating the cracks in the walls and ceilings. Usually, concrete and cement construction, if not built with proper materials and chemicals, may tend to develop cracks and fissures over time. But if you use a proper wall crack repair material, this won’t happen. In this blog, we will explain some of the best methods to repair the cracks in your walls permanently. Let’s begin!

Filling Cracks Permanently in the Walls

No one wants to go over the process of repairing and reconstructing the walls and ceilings again and again. Just imagine how would you feel if after every monsoon you have to get your walls and ceiling repaired and fixed to counter the fractures in them! 

For this reason, we must use a reliable and easy method to avoid the formation of these cracks again and again. The best product that can help you in this regard is Cracksil. But how? Let’s find out.

1. DryWall Fixing 

Fixing drywall is the easiest. Cut a 1/8- to 1/4-inch V-notch along the crack’s length using a utility knife. Clear the area with a vacuum. Fill in the fracture by using Cracksil and paper tape or mesh joint tape, extending the tape’s length by about 2 inches on each side. Permit to dry. The new layer of Cracksil should be applied, this time feathered about 6 to 7 inches on both sides of the crack. Dry out overnight. Sand lightly until smooth. Paint or wallpaper can be applied to the wall.

2. Plaster Patch

Fixing a plaster wall is also not much difficult. However, if you see the plaster pulling off from the lath, another process needs to be followed, but that rarely happens. So, a simpler way is to drill 3/16-inch holes along the length of the crack for masonry bits that will penetrate the plaster. Apply the first coat of Cracksil into these holes, pat dries the excess compound, and allow it to dry for some time. Sand smooth when dry, then apply a second coat of Cracksil to hide the original crack. Also applying for plaster work services from experts can help you prevent the plaster from pulling off once cracks are sealed through Cracksil.

3. Deep Cracks in Concrete Walls 

You will have more effect if you first fill the crack with a filler compound before sealing it with Cracksil if it is deeper than a 1/4 inch in drywall or plaster. Follow the manufacturer's directions while mixing the compound. Fill the gap completely, and flush it with the surrounding wall. To obtain a smooth wall, cover it with adhesive and joint compound as previously described.

However, all these steps for wall crack repair are quite easy and can be done at home, if you have the appropriate knowledge and expertise. Also, the most common walls found in our homes are either drywall, plaster walls, or concrete walls. Cracksil works on all three of them, so it is probably the most effective solution to repair the cracks permanently.

Also if you are looking for quick solutions to fill cracks in walls, read this detailed blog on Quick Waterproofing Solution To Fill Cracks 

However, if you are not completely sure how to follow these steps, then you should not experiment further because you might end up damaging the whole structure. In that case, you must call in for 20 MCC crack filling services.  So, if you ever need to have wall crack repair services with the best company - one that is reliable and cost-effective, you must not go any further than 20 MCC waterproofing experts who work on providing you with an effective reliable solution. Book an appointment to consult with our experts